top of page

Water Recycle Systems

WRS 42 Water Recycle System

The WRS 42 Recycle System is designed to solve wash water disposal problems for the high volume user. This extra high capacity completely automatic treatment unit will collect dirty, oily wash water and process it so that it can be reused in the washing operation. The recycle feed pump transfers the dirty water from a collection sump to the treatment unit. Reagents are automatically added to the water to kill bacteria and odours, neutralize the pH, and remove pollutants such as oil, grease, dirt, and sludge. These reagents, which are commonly used in drinking water treatment, actually make the water much more environmentally friendly and less hazardous for personnel doing the washing. The treated water is then stored until needed for washing.

The WRS 42 treats up to 12 gpm (18000 gpd), which is plenty for even very large washing operations. This unit is equipped with many convenience features, including automatic priming valves for the reagent pumps, integral water storage tank, and filters status pressure gage. It comes completely assembled and wired, ready to be set in place and plugged into a 15 amp, 115 volt outlet. The water discharge from the integral storage tank is pressurized to feed your pressure washers, even if they are remotely located. Premium components and quality construction ensure the most trouble-free operation possible.

Illustration of the WRS 42 Recycle System


Rated flow:

Up to 12 gpm (18000 gpd)

Electrical requirement:

115 VAC, 60 Hz, 1 phase, 15 amp total

Recycle feed pump:

Self-priming centrifugal cast iron pump with 1/2 HP thermally protected motor. Mounted on the machine base. Controlled by float switch in collection pit. Suction line strainer and foot valve are provided.

Discharge pump:

High head centrifugal pump with1/2 HP thermally protected motor. Provides pressurized water flow to pressure washer and other uses.

Electrical controls:

Inlet strainer:

GFCI provided, prewired with 15 amp plug, 10 ft cord Lighted switches for power, feed pump, coagulant pump, oxidizer pump, pH adjuster pump, makeup water, and manual drain. pH controller with digital display. NEMA 4 rated enclosure.

Reagent metering pumps:

Large size with stainless steel screen in corrosion resistant plastic housing.

Filter system:

Electronic controlled diaphragm pumps with stroke rate and stroke length controls and automatic degassing head for ease of priming. Three pumps are supplied, for coagulant, oxidizer, and pH adjuster. Pumps are mounted in a fiberglass enclosure.

Two 20" long 20 micron filter cartridges for final polishing. Two sets included.

Sludge collection system:

Three large, disposable fabric socks collect sludge. Two sets included with machine.

Make-up water:

100 psi maximum pressure. Automatically added as required by application.

Recycle tank capacities:

Coagulant tank- 150 gallons

Separator tank- 180 gallons

Storage tank- 150 gallons

Total water capacity- 480 gallons

Recycle construction:

Heavy duty polypropylene tank with unitized construction. Schedule 80 PVC pipe used throughout. Heavy steel base assembly.

Connection sizes:

Machine inlet- 1 1/2 MNPT

Treated water outlet- 3/4 FNPT

Drain line- 1 FNPT

Make up water- 1/2 FNPT

Overall dimensions:

8 ft 0 in long, 3 ft 8 in deep, 4 ft 3 in tall

Shipping Weight:

900 pounds


Second pH adjusting pump system. Additional treated water storage capacity. Sand filter final polishing system. Activated carbon water polishing systems.

Icon of hand with water drop

Not Finding What You Need?

Let us custom-design the system to your specifications

Icon of water flow

Keeping You Up & Running

We offer service and maintenance programs to suit your needs

Contact Us Icon

Find Our Office

Use the interactive map on our Contact Us page

bottom of page