top of page

Water Recycle Systems


Rated flow:

12 gpm (18000 gpd)

Electrical requirement:

115 VAC, 60 Hz, 1 phase, 15 amp total

Feed pump:

Self priming centrifugal cast iron pump with 1/3 HP thermally protected motor. Collects water from washing area.

Discharge pump:

High head centrifugal pump with 1/2 HP thermally protected motor. Supplies pressurized water to use.

Electrical controls:

GFCI provided Prewired with 15 amp plug, 10 ft cord Power switch, lighted NEMA 4 rated enclosure

Oxidizer metering pump:

Electronic controlled diaphragm pump with stroke rate and stroke length controls and automatic degassing head. Injects oxidizer to control odor and bacteria.

Filter system:

High capacity permanent element filter system with manual backwash, plus replaceable 20" long 5 micron cartridge filter for final polishing.

Holding and collection tank:

1000 gallon polyethylene holding tank, With divider and inlet and outlet piping.

Make up water:

Flow as required for application 100 psi maximum pressure

Connection sizes:

Feed pump- 1 NPT

Treated water outlet- 1 NPT

Drainline- 1NPT

Make up water- 1/2 NPT

Overall dimensions:

Tank 9 ft long, 5 ft wide, 5 ft tall Control and pumping module 4 ft long, 2 1/2 ft wide Module includes pumps, control panel, and filter system.

Shipping weight:

600 pounds approximate


Additional water storage capacity. pH adjustment system. Activated carbon water polishing system. Ozone treatment. Pretreatment systems, oil skimmers, oily water separators. Custom modifications available.

Illustration of the WFS 42 Water Filtration System
Icon of hand with water drop

Not Finding What You Need?

Let us custom-design the system to your specifications

Icon of water flow

Keeping You Up & Running

We offer service and maintenance programs to suit your needs

Contact Us Icon

Find Our Office

Use the interactive map on our Contact Us page

bottom of page