top of page

Oil Water Separators

OILY WATER SEPARATORS WITH PVC HOUSINGS

Housing construction is polyvinylchloride (PVC) for the utility type. Components are high quality and the separators are designed for long, trouble-free service life. Maintenance required is minimal, but it is important that it be performed to ensure proper operation. Separation means is by a polypropylene bead pack. Dual element sensing probes are utilized to more positively determine the oil level and discharge the oil when necessary.

APT-8-P OILY WATER SEPARATOR SPECIFICATIONS

Rated flow:

8 gpm (11500 gpd)

Principle of operation:

Oily water separation to 15 ppm via enhanced gravity and large coalescer bed.

Capacity:

Oils with up to .96 specific gravity, 0 to 100% concentration. Temperature 33 to 120F degrees ambient.

Suction:

25 ft. maximum vertical suction lift, less than 15 ft recommended.

Discharge pressure:

15 psi at 8 gpm, 50 psi maximum at 4 gpm.

Oil:

30 ft. maximum vertical discharge, 3 gal. approximate per batch.

Tank construction:

PVC material, continuously welded.

Internals:

Single, large coalescer bed, polypropylene beads.

Electrical requirement:

115 VAC, 60 Hz, 1 phase. 15 amp protected circuit reqd.

Pump:

Model 333 progressive cavity pump.

Motor:

1/2 hp, 1750 rpm, TEFC

Valves:

Bronze solenoid, gate, pressure relief (30 psi)

Pipe:

Brass with NPT threads.

Controls:

JIC enclosure, dielectric interface sensor with 2 tip sensitive probes.

Connection sizes:

Inlet: 1 1/4 NPT
Backflush recirculate: 3/4 NPT
Oil Discharge: 3/4 NPT
Blackflush inlet: 3/4 NPT
Blackflush water: 30 psi maximum

Overall dimensions:

Less than 27" x 27" x 40" tall

Weight:

Dry: 270 lbs.
Wet: 360 lbs.

Icon of hand with water drop

Not Finding What You Need?

Let us custom-design the system to your specifications

Icon of water flow

Keeping You Up & Running

We offer service and maintenance programs to suit your needs

Contact Us Icon

Find Our Office

Use the interactive map on our Contact Us page

bottom of page